Home page About us Products Clients Projects Contacts
Solar water heater
•  Model: SFA
•  Model: SFB
•  Model: SFC
•  Model: SFD
•  Model: SFE
•  Model: SFH
Solar Air Heating System  
Model: SFG
Vacuum tubes
Model: SFVA
Model: SFVB
Model: SFVC
Boiler with one coils
Model MÂ S1 (80-120 l)
Model ÂÂ S1 (120-200 l)
Model SB S1 (150-500 l)
Model SB S1 (750-1,000 l)
Boiler with two coils
Model ÂÂ S2 (200 l)
Model SB S2 (200-1,000 l)
Special boilers
With a coil and casing type ÂÂ S1M
(80-200L)
Industrial boilers with two coils type SB S2 (1,500-2,000L)
Industrial boilers with one coil type SB S1 (1,500-2,000L)
Industrial boilers type SB EL
(1,500-2,000L)
Industrial water containers without a coil type HSE (2,500-10,000L)
Industrial water containers with one U-shaped coil type HSU-1 (2,500-10,000L) HSU-1 (2,500-10,000ë)
PRODUCTS Special boilers Model HSU-1 (2,500 - 10,000L)
Industrial water containers with one U-shaped coil type HSU-1 (2,500-10,000L)
Primary description

They are produced from 2500, 3000, 4000, 5000, 7000 up to 10000 litres. They are used to satisfy the hot water needs of especially large consumers. They are produced only in horizontal execution due to the high requirements set for them and explaining their big mass. They are provided with a U –type heat-exchanging unit. It is designed with the purpose to increase the heat-exchanging surface and consists of U-shaped pipes united in a common collector at the flange of the boiler.
All industrial water containers of type HSU 1 are produced from steel sheet protected with a high quality double layer coating: EPICON T - 500: WELBOND HM used for sweet water storage tanks.
The industrial water containers of type HSU 1 have capacities from 2500, 3000, 4000, 5000, 7000 up to 10000 L. They are provided with different number of stainless electric heaters of 12 kW which are connected to a special circuit board.
The leads for deaeration, recirculation and the sensors are located in the upper part of the water container.

 
Technical description

Water container

Material: stainless steel sheet ST 37.2
Welding: automatic metal inert gas welding
Protection coating: EPICON T - 500: WELBOND HM
Maximum working pressure: 8 bar
Maximum water test pressure: 15 bar
Maximum operating temperature: 95 °Ñ
Insulation: soft polyurethane foam,100 mm thick density 23 kg/m3
Decorative encasing: masked peckalite in different colours

Electric heaters: 12kW,(400 V)

 
   Technical data

Home | About us | Products | Clients | Projects | Contacts
STOPER
Plovdiv , 140 Maritza blv.
òål. / fax: +359 32 625204

Razgrad , 2a Beli Lom St.
òål. / fax: +359 84 661041
Powered by CS Development Ltd.        All rights reserved STOPER
Íà÷àëî Êîíòàêòè English Áúëãàðñêè Español Ðóñêè Deutch