Home page About us Products Clients Projects Contacts
Solar water heater
•  Model: SSA
•  Model: SSB
•  Model: SSC
•  Model: SSD
•  Model: SSE
•  Model: SSH
Solar Air Heating System  
Model: SFG
Vacuum tubes
Model: SSVA
Model: SSVB
Model: SSVC
Boiler with one coils
Model MÂ S1 (80-120 l)
Model ÂÂ S1 (120-200 l)
Model SB S1 (150-500 l)
Model SB S1 (750-1,000 l)
Boiler with two coils
Model ÂÂ S2 (200 l)
Model SB S2 (200-1,000 l)
Special boilers
With a coil and casing type ÂÂ S1M
(80-200L)
Industrial boilers with two coils type SB S2 (1,500-2,000L)
Industrial boilers with one coil type SB S1 (1,500-2,000L)
Industrial boilers type SB EL
(1,500-2,000L)
Industrial water containers without a coil type HSE (2,500-10,000L)
Industrial water containers with one U-shaped coil type HSU-1 (2,500-10,000L) HSU-1 (2,500-10,000ë)
PRODUCTS Special boilers Model BÂ S1M (80-200L)
With a coil and casing type ÂÂ S1M (80-200L)
Primary description

The boiler model Sunsystem ÂÂ S1M is offered from 80, 100, 120 to 200 litres. The boiler with a coil and casing provides for a possibility of combining two independent thermal sources for heating / boiler and solar system / and an electric heater in water container of small capacity. Due to the additional integrated electric heater, there are three sources of energy. They are offered form 80 to 200 litres, model ÂÂ, bottom ô 520 mm. They are made with enameled or Cr-Ni water containers. The enameled ones are secured with anode protection to provide many years of operation. The boilers are offered both in vertical and horizontal executions. The ones with horizontal execution have leads for hot and cold water turned to the right as per standard. They can also be produced with leads turned to the left upon request.

 
Technical description
Water container:
Material :steel sheet ST37.2 or stainless steel sheet 1.4301
Welding: automatic metal inert gas welding
Protection coating :high quality glass ceramic coating and protection anode
Maximum working pressure : 6 bar
Maximum water test pressure: 15 bar
Maximum operating temperature: 95 °Ñ
Insulation: polyurethane foam
Density: 40 kg / m3
Thickness:32 mm
Decorative encasing:
Material: Steel encasing, dust-painted
Coils:

Material: steel tube ST 37,2 or stainless tube 1,4031
Maximum coil test pressure: 25 bar
Electric heater:
2 kW - /230 V/ with integrated double-protection thermal regulator
3 kW - /230 V/ with integrated double-protection thermal regulator
 
   Technical data
Home | About us | Products | Clients | Projects | Contacts
STOPER
Plovdiv , 140 Maritza blv.
òål. / fax: +359 32 625204

Powered by CS Development Ltd.        All rights reserved STOPER
Íà÷àëî Êîíòàêòè English Áúëãàðñêè Español Ðóñêè Deutch